Fabtech | 15-20 Ford F150 2WD 4in Basic | System w/Rear Stealth Shocks

CROSSMEMBERS

1/4 thick steel lower control arm crossmembers are arched for maximum ground clearance. Four adjustable alignment cams provide a wide range of adjustment. The fully welded box design of these crossmembers provides additional strength to the front suspension.

STEERING KNUCKLES

Extended length ductile iron steering knuckles retain near stock track width keeping the tires under the fenders. These steering knuckles are designed to work in conjunction with the Ford ESC for proper functionality at all speeds.

BRAKE LINE BRACKETS

Re-positions the factory Ford brake lines down on the frame for the new travel range without having to open the brake system. Keeps factory fluid system intact.

SWAY BAR BRACKETS

1/4 thick steel drop brackets re-position the front sway bar for the increased ride height. This allows the sway bar link ends to fully cycle without binding throughout the extended travel range.

REAR LIFT BLOCKS

2.25 Tall rear lift blocks replace the factory blocks without changing the ride quality or load carrying capacity.

REAR U-BOLTS

U-Bolts that retain the entire rear differential to the vehicle. A critical part that demands the best quality for your vehicle.

STEALTH REAR SHOCKS

Extended length monotube shocks have a Nitrocarb piston rod for corrosion resistance and resist rock chipping. Great highway ride with offroad damping capacity.