The front shocks are designed for a 1.50-inch lift but still allow for finer ride height adjustment via the spring preload. All four shocks feature 2-stage remote compression adjusters on each reservoir, allowing you to fine-tune your suspension to correlate with your terrain and comfort.
Offering an oversized 2.0" bore diameter and .75" shaft diameter, these shocks exceed all OE strength specifications & requirements.
The oversized remote reservoirs offer increased nitrogen area, providing consistency & temperature stability in any condition, resulting in constant performance. The -6 Stainless braided lines use a unique O-ring fixture device that allows complete 360° swiveling capability, relaxing any stress or torque applied to the hose in normal shock absorber motion.
Improves off-roading experience handling through the desert, trails, whoops, etc.
This JRi shock is dyno-tested to ensure excellent performance and is re-buildable and serviceable for future maintenance.
Technical Advantages:
- Cerakote® finish on the shock bodies for excellent corrosion resistance
- Hard Anodize Type III for the reservoir body
- Sulfuric Anodize Type II for all remaining 6061-t6 aluminum parts, including internals
- Premium synthetic hydraulic fluid
- High-temperature low friction primary shaft seals and bearing
- 33" tire and wheel fitments with no interference
- Completely rebuildable & serviceable
- Limited Lifetime Warranty
- Every shock is hand built and dyno tested
- Remote reservoir mounting hardware included
Designed and manufactured in the U.S.A.
