2.0" SST Lift Kit - 2006-2018 Toyota RAV4 (includes Adventure)

2" Front lift/1" Rear lift Steel & Billet Aluminum construction

Increases ground clearance

Improves off-road and trail adventure experience

Allows for up to a 245/65-17 tire on a 17x8 wheel with +38 offset

Upgraded sway bar end-links 

• The ReadyLIFT Toyota RAV4 SST Lift Kit installs in half the time of other kits and retains the factory camber/caster for ideal alignment courtesy of our unique offset spacer design. ReadyLIFT now offers a 2" SST Lift Kit for the 2006-2018 Toyota RAV4. This exciting new lift solution is easy to bolt-on and requires no structural modifications. Our RAV4 SST lift kit includes front strut top mount spacers fabricated from heavy-duty steel and protected with a durable powder coat finish. The rear is lifted with CNC-machined aircraft-grade billet aluminum cradle drops and includes all necessary brackets and hardware. This RAV4 SST Lift kit ensures the suspension performs and handles properly on the roads or on the trails. This lift kit creates an exceptionally improved stance that, when combined with a larger tire, results in increased ground clearance at the rockers. ReadyLIFT proudly introduces new CUV SST Kits with upgraded sway bar end-links eliminating relocation bracket flex and compliance associated with the original OE sway bar mounting system. The all-new upgraded drop links are engineered for precise fitment, increase sway bar effectiveness, and maintain suspension geometry and ride & handling performance.
   Allows for up to a 245/65-17 tire on a 17x8 wheel with +38 offset.
• Lift kits are vehicle-specific engineered to the highest standards.
• Upgraded sway bar end-links 
• Offset designed fabricated heavy-duty steel plate top-mount strut extensions maintain factory alignment geometry.
• Easy, bolt-on installation - no permanent modifications.
• Delivers increased ground clearance.
• Allows for increased tires sizes that are ideal for trail adventures.
• Made in USA.
• P245/65-17 17x8 +38
  Ride Quality Note: When lifting a vehicle and installing aftermarket wheels and tires, a tire manufacturer's construction and material quality can alter vehicle ride quality. When increasing a vehicle wheel and tire size, most larger aftermarket truck and SUV tires are 10-ply (or more) E tires compared to typical OEM 6-ply C tires. This more rigid sidewall construction increases the perception of suspension stiffness often described as ride harshness. The ride, handling, traction, noise, fuel economy, and wear differences between All-Season, All-Terrain, Mud-Terrain, or Trail-Terrain type tires can be significant. Please take into account tire and wheel choice will generally have a meaningful impact on the ride & handling experience.
• Tire Size Note: ReadyLIFT wheel and tire fitment recommendations are typically based on Wheel Pros wheels and Nitto tires. Due to product differences among tire manufacturers, tire specifications and dimensions including, but limited to, overall diameter, rolling diameter, tread width, aspect ratio, lug pattern, sidewall construction and inflation pressure, will vary meaningfully by tire and wheel manufacturer. Every tire and wheel combination should be test fit prior to installation. Consult your local installer to learn more about the right tire fitment for your application.
• Front strut extensionsBrake line extensionsAll necessary hardware
• Upgraded sway bar end-links 
• Rear cradle drops
• SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.INSTALLATION ALIGNMENT NOTE: Your vehicle may require alignment after product installation. You may incur additional costs to align the vehicle.INSTALLATION HEADLAMP AIM NOTE: In addition to your vehicle alignment, for your safety and others, it is necessary to check and adjust your vehicle headlamps for proper aim and alignment after product installation. You may incur additional costs to adjust the headlamp system.INSTALLATION ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE: If your vehicle is equipped with active or passive safety/collision monitoring and/or assistance/avoidance systems including, but not limited to, camera- or radar/sonar-based systems, check and adjust your vehicle’s systems for proper aim and function after product installation. In some instances, your vehicle may require OEM dealer service tools and factory-trained technicians to re-calibrate ADAS. You may incur additional costs to adjust ADAS systems.
  DO IT YOURSELF: Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation. Download Pdf InstructionsHAVE A CERTIFIED MECHANIC DO IT FOR YOU!

• Estimated Installation Time: 3 Hours +/- 0.5 hours (excluding alignment and wheel/tire assembly)